Electric Scooter Vsett 9 APEX 48V 19.2AH

Battery care

1. Charging: Always use the original charger. Charge the battery to the recommended level (usually 80-100%) and avoid overcharging or undercharging. Do not leave the battery plugged in overnight.
2. Temperature: Keep the battery in optimal temperature conditions – between 10°C and 30°C. Avoid extreme temperatures that can damage the battery cells.
3. Storage: If you will not be using the scooter for a long time, charge the battery to about 50% and store in a dry place at a moderate temperature.

Scooter Care

1. Cleaning: Clean the scooter regularly, especially after riding on uneven terrain or in the rain. Use a soft cloth, avoiding getting the electrical parts wet.
2. Lubrication: Check the bearings and axles regularly. If necessary, lubricate the moving parts to ensure smooth operation.
3. Checking the screws: After each ride on uneven terrain, check the screws and tighten if necessary. Loose screws can cause vibration and damage.

Instructions for Use

1. Getting to Know the Controls: Before your first ride, review all manufacturer instructions and make sure you understand the scooter's functions and controls.
2. Riding: Avoid sudden movements such as sudden acceleration or braking. This can overload the motor and battery.
3. Suitable surface: Ride on suitable and smooth terrain, avoid muddy or very uneven roads to avoid mechanical damage.

Safety instructions

1. Wearing protective equipment: Always wear a helmet and other protective equipment such as knee and elbow pads, especially at higher speeds.
2. Check before each ride: Check the tires, brakes and battery before each ride. If you notice a problem, postpone riding until the scooter has been checked by a specialist.
3. Braking: Plan your braking in time and do it smoothly, especially on slippery surfaces. Sudden braking can lead to loss of control.
4. Lighting and visibility: Ride with your lights on and wear reflective elements for better visibility, especially at night or in poor weather conditions.

Preventing damage

1. Avoid overloading: Follow the maximum weight guidelines to prevent wear and tear on key components such as the motor and battery.
2. Control your speed: Avoid high speeds, especially in poor weather conditions or in busy areas.

Seasonal recommendations

1. Winter: Do not ride on icy roads or in heavy snow. This can damage electrical components and increase the risk of falling.
2. Summer: In the summer, avoid leaving the scooter in direct sunlight to avoid damaging the battery and electronics.

Following these recommendations will extend the life of your scooter and ensure your safety on the road.